Powr Labs™ Armband Heart Rate Monitor Pairing

Before you get to enjoy all the awesomeness of your Powr Labs™ Armband Heart Rate Monitor, you need to survive one pesky step: pairing your heart rate monitor to the App (bluetooth) or Device (ANT+) of your choice.

Luckily we've built a comprehensive set of instructions for the known apps and devices that are field tested by us and our customers.

USING YOUR HEART RATE MONITOR

  • Turn On: There is no power button. Put on the armband and it will turn on automatically. Before first use, make sure it is fully charged and remove the protective sticker from the sensor on the back of the unit. A green LED light for 2 seconds means the battery is full. Red and green LED lights flashing alternately means the battery is low.
  • Pairing: You must be wearing the armband to pair. See the pairing steps below.
  • Positioning: Wear on your forearm (near the elbow) or upper arm, with the sensor pressed firmly against your skin and away from muscle bulges. Strap should be snug enough not to move, without cutting off circulation or causing discomfort.
  • Charging: Connect the magnetic charging cable to the charging terminal on the bottom of the unit, then plug the USB end into a laptop or wall adaptor (not included). Make sure the port is dry before charging. The red LED light will stay on while charging and turn green when fully charged.
  • Turn Off: Remove the armband. It will shut down automatically when it cannot detect a heart rate for 90 seconds.

PAIRING YOUR HEART RATE MONITOR

  • Charge: Ensure your unit is fully charged. Low battery can cause unstable connections or stop the armband from being found.
  • Wear Armband: You must be wearing the armband to turn it on and transmit a heart rate signal to the App or device you wish to pair with. Keep your arm still for 10-15 seconds so the sensor can pick up your heart rate.
  • Pairing LED Light Signals: The blue LED light will flash while the armband is searching for a connection. Once connected & paired, the green LED light will flash once every minute.

Initial Set-up With Bluetooth Mobile Apps:

  • Set Bluetooth on your phone to "On".
  • Find the sensor settings menu in the App you are looking to pair with. Pair through the App, not through your phone's Bluetooth settings.
  • Ensure your armband HRM is on (wearing it with the blue LED flashing).
  • Select the Powr_Labs device name from the App devices available.
  • The green LED will flash once every minute once pairing is successful. The blue LED will keep flashing if not paired.

Initial Set-up With ANT+ Fitness Equipment, Machines, Computers & Watches:

  • Ensure your armband HRM is on (wearing it with the blue LED flashing).
  • Find the sensor settings menu in the device you are looking to pair with and select "Add HR Sensor"
  • Select the Powr_Labs device name from the devices available.
  • The green LED will flash once every minute once pairing is successful. The blue LED will keep flashing if not paired.

*NOTE: When pairing to group heart rate monitor workout platforms, like Orange Theory, you will need to provide the device ID printed on the back of the heart rate monitor unit.

VERIFIED APPS

**NOTE** If you have paired the armband in your phone's Bluetooth settings, "forget" it there first, then connect through the App. Close other apps that may be using Bluetooth.

VERIFIED ANT+ DEVICES & PLATFORMS

For a full-list of ANT+ compliant devices, click HERE.